Aerzen USA insights and guidance for blower, compressor and vacuum pump applications
Aerzen USA Named Best Places to Work in PA 2015
Tags: Aerzen USA
Aerzen USA has made a change in company's administrative structure. Pierre Noack has been President of Aerzen USA for over 30 years and the company has achieved growth and success. It is at this time that his services are required to support the development of Aerzen’s Worldwide Process Gas Division. He will be moving to Germany, near Aerzen, and will be working at the Aerzen headquarters. Additionally, he will remain on the Board of Directors of Aerzen USA.
Tags: Aerzen USA
Aerzen USA's Business Philosophy: People, Planet & Prosperity
Aerzen USA is well known for blowers, compressors and vacuum pumps. However the key to success is in the company's business philosophy featuring collaboration with customers and following a "Triple Bottom Line" mindset that includes People, Planet & Prosperity.
Aeration Blower Saves $44K Annually For Wastewater Treatment Plant
The segment from WaterOnline Radio features interviews with John Franz, wastewater treatment plant manager for the City of Anacortes, WA, as well as Kevin Grant, a regional sales manager for Aerzen USA.
Tags: Aerzen, positive displacement, rotating equipment, Aerzen USA, pd blower, rotary lobe blower, turbo blowers, blower sizing, wastwater, water treatment, WWTP, aeration
A Turbo Blower for the Base Load, PD Blower for the Peak Load
A biological municipal wastewater treatment plant with a considerably fluctuating discharge quantity can only perform its function with utmost energy efficiency and reliability if the process air consumption of the aeration basin can be adjusted continuously and is fully automated in order to deal with widely fluctuating load quantities. The example of the wastewater treatment plant shows how this is achieved with the use of a speed controlled Aerzen turbo blower.
Tags: Aerzen, positive displacement, rotating equipment, Aerzen USA, pd blower, turbo blowers, blower sizing, wastwater, water treatment, WWTP, aeration
More pressure for Aerzen Process Gas Compressors
Due to a new bearing and shaft design it is possible to increase the maximum admissible differential pressures to 25 bar in the process gas compressors VRa 236 H and VRa 336 H. Thus, with a multi-stage unit discharge pressures of up to 53 bar abs. can be reached.
Tags: Aerzen, compressors, screw compressor, oil-free screw process gas compressor, Aerzen USA
How To Choose The Right Blower For Wastewater Treatment (Podcast)
Three main blower technologies are condsidered for waste water treatment applications:
Tags: Aerzen, positive displacement, Aerzen USA, pd blower, rotary lobe blower, turbo blowers, blower sizing, wastwater, water treatment, WWTP, aeration
An Engineer's Mini-Guide To Blower Technology Selection
Turbo Blowers. Positive Displacement Blowers. Hybrid Rotary Lobe Blowers. Which one should you choose for your wastewater treatement application? How much energy can you really save? Who can you trust to give you an objective answer? The best place to start is by downloading the Engineer's Mini-Guide To Blower Technology Selection.
Tags: Aerzen, positive displacement, compressors, Aerzen USA, pd blower, rotary lobe blower, turbo blowers, blower sizing, wastwater, water treatment, WWTP
Real-time Condition Monitoring For Blowers And Compressors
The Aerzen iAir Remote Monitoring System (RMS) is a comprehensive monitor that can be attached to any blower or compressor to capture real-time activities and conditions. Based on industrial cellular technology, the RMS can function in any location with cellphone coverage for both indoor and outdoor applications. The system is easily installed and linked directly to your cell phone for up-to-the-minute condition reports and notifications. This allows for peace of mind and troubleshooting when you are not accessible to the equipment.
Tags: Aerzen, positive displacement, Aerzen USA, pd blower, rotary lobe blower, pneumatic conveying
Shipping damage is the top number one issue followed by scheduling and only then cost. It is amazing how much freight gets damaged per year. This is particularly true for new blower packages that are shipped via LTL (Less than truckload) and so called common carrier. Although deemed the most cost effective – expediting and broker companies managed to push the cost down - it is the most difficult way to get machinery to a job site undamaged. Because freight must be consolidated in the carrier’s main hubs the equipment must be moved often. The mostly heavy and odd shaped freight with uneven weight distribution is moved with fork trucks that are significantly undersized. Making things worse is the fact that logistics is a business model where people make Cents on a Dollar and thus the time freight spends in non value adding moving around within terminals is kept to an absolute minimum causing fork lift drivers to drive fast and furious. Freight gets shoved around, stacked (when it should not be) and dropped rapidly (giving drop-shipment a different meaning). The result is that sound enclosures, castings, instrumentation etc gets damaged significantly before it even makes it to the final destination.
Tags: Aerzen, rotating equipment, screw compressor, Aerzen USA, pd blower, rotary lobe blower, turbo blowers
Call to action will go here below
This is the content. This is demonstration text. Click 'edit' above to create your own content.